background image

www.smoothfitness.com

39 

 

 

 

WARRANTY 

LIMITED HOME USE WARRANTY – SMOOTH FITNESS Ellipticals and DMTs Warranty 

 

Warranty Coverage

: EVO Fitness and Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original owner that each new product to be free from defects in 

workmanship and material, under normal use and conditions. 
 

Period of Coverage

: The Warranty on this product runs from the date of original purchase using the following schedule: 

 
 
 

 

 
 
Labor: Smooth Fitness will reimburse for labor costs for One (1) year. Smooth Fitness reserves the right to either: 
Hire and reimburse an independent service technician, who will come into the home for the repair,  
OR 
In the event that there is not an available certified Smooth Fitness service technician, Smooth will send the part directly to the consumer and will pay $75 US per 
occurrence for the labor costs of such repair. If multiple repair attempts must be made for one reported problem, Smooth will only reimburse once per 
occurrence. 
 
Smooth Fitness reserves the right to inspect damaged parts for misuse. Your Original Receipt is proof of purchase and should be kept with the product manual. 
You may be required to show proof of purchase prior to warranty service being initiated. 
  

Remedy Provided by Smooth Fitness

Smooth Fitness will provide a replacement part free of charge if a defect is found during the Warranty period. Smooth 

Fitness may at its discretion, choose to provide any of following parts or repair options. In the event that a part is determined in need of replacement, upon 
receipt of the part by Smooth Fitness, Smooth Fitness may send out the part by UPS ground or another such carrier directly to the customer’s home.  

 
Any redemption may be by repair or replacement of the affected parts and/or product at the sole discretion of Smooth Fitness, by personnel approved by Smooth 
Fitness. 
 
Parts repaired or replaced pursuant to this Warranty shall be warranted for the unexpired portion of the Warranty applying to the original product. Any technical 
advice furnished before or after delivery in regard to the use or application of Smooth Fitness products is furnished without charge and on the basis that it 
represents Smooth Fitness' best judgment under the circumstances but that the advice is used at your sole risk. 
 

Procedure for Obtaining Your Remedy Under This Warranty

: To obtain service on a Smooth Fitness product, call Smooth Fitness. In the instance that 

service is not available in an area, Smooth Fitness, at its discretion, can either 1) find a service technician in your area to perform warranty service, 2) have a 
local dealer perform warranty service, or 3) send the warranty parts to you and reimburse  as described above. To help the technician assist you, please have the 
following information ready: 

 

Model name or number from the cover of the manual; 

 

Serial number located on the frame of the unit; and 

 

The part description and the order number. 

 

Limitations on Warranty

: This Warranty does not cover any problems, damages or failures that are caused by accident, improper assembly, failure to observe 

cautionary labels on the product, failure to operate the product correctly, power grid failures or spikes from your local electricity provider, abuse or freight 
damage. Smooth Fitness does not warrant against any damage or defects that may result from repair or alterations made to the product by an unauthorized repair 
facility.  In order for this warranty to be valid, all Smooth Fitness and EVO Fitness exercise equipment must be stored and used in a fully finished and livable 
room within the residence (not including an indoor swimming pool room and areas with excessive humidity). 
 
This Warranty shall terminate if you sell or otherwise transfer this product. This Warranty does not apply to any product shipped or handled outside of the 
United States or Canada. This Warranty does not apply if the product is used as a rental product or in commercial use. Consequential and incidental damages are 
not recoverable under this Warranty. (Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or 
exclusion may not apply to you.) 
 
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ALL IMPLIED WARRANTIES, 
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE (1) 
YEAR FROM THE EFFECTIVE DATE OF THIS WARRANTY. SMOOTH FITNESS IS NOT 
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN PARTS NOR FOR 
ANY BREACH OF EXPRESS OR IMPLIED WARRANTIES. SMOOTH FITNESS' SOLE LIABILITY UNDER THIS 
WARRANTY IS LIMITED TO THE TERMS DESCRIBED IN THIS FORM. THIS WARRANTY GIVES YOU SPECIFIC LEGAL 
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. 
 

FORM WS-1 (rev. 03/2008)

 

 

Model Name 

Frame 

Resistance Assembly 

Parts & Electronics 

Labor 

CE-3.6 

Lifetime 

Lifetime 

3 years 

1 year 

Summary of Contents for CE-3.6 ELLIPTICAL









































Reviews: