11
“
Seat Adjustment
”
Warning: Do not use the Sit N Cycle without verifying that the seat is
locked in place. Before moving or using the bike, pull upward on the
seat to verify it cannot be removed
.
1. Turn the seat adjustment
knob counter-clockwise to
loosen.
2. Pull back the seat
adjustment knob to
release the seat.
3. While holding the knob out,
move the seat up or down.
The seat will move in a 45
degree motion. Once the
required height is reached,
release the knob and slowly
push the seat downward until
the pin snaps in place. Verify
that the seat is locked in place
by pulling upward on the seat.
If the seat is properly locked,
the seat will not move up or
down.
4. Turnthe seat
adjustment knob
clockwise to tighten
the adjuster knob.
Completely tighten
the knob prior to use.
Summary of Contents for sit N cycle SNC-II
Page 13: ...13 Exploded Diagram...
