background image

 

18 

LIMITED HOME USE WARRANTY 

– SMOOTH FITNESS Bikes Warranty 

 
Warranty Coverage

: Smooth Fitness LLC. ("Smooth Fitness") warrants to the original owner that each new product will be 

free from defects in workmanship and material, under normal use and conditions. 
 

Period of Coverage

: The Warranty on this product runs from the date of original purchase using the following schedule:   

 

Model Name 

Plastics, Upholstery and Wear and Tear Parts   

Frame and Mechanical Parts   

SMOOTH XBIKE 

90 days 

1 year 

Smooth Fitness reserves the right to inspect damaged parts for misuse. Your Original Receipt is proof of purchase and 
should be kept with the product manual. You may be required to show proof of purchase prior to warranty fulfillment. 
 

Remedy Provided by Smooth Fitness

Smooth Fitness will provide a replacement part free of charge if a defect is found 

during the Warranty period. Smooth Fitness may at its discretion choose to provide any of the stipulated parts or repair 
options. In the event that a part is determined to be in need of replacement, upon receipt of the defective part by Smooth 
Fitness, Smooth Fitness may send out the part by UPS Ground or another such carrier directly to the customer’s home at 
the customer’s expense. 

 

 
Any redemption may be by repair or replacement of the affected part(s) and/or product at the sole discretion of Smooth 
Fitness, by personnel approved by Smooth Fitness. 
 
Parts repaired or replaced pursuant to this Warranty shall be warranted for the unexpired portion of the Warranty applying to 
the original product. Any technical advice furnished before or after delivery in regard to the use or application of Smooth 
Fitness products is furnished without charge and on the basis that it represents Smooth Fitness' best judgment under the 
circumstances, however, the advice is used solely at the customer’s discretion. 
 

Procedure for Obtaining Your Remedy Under This Warranty

: To help the technician assist you over the phone, please 

have the following information ready: 

 

Model name or number from the cover of the manual; 

 

Serial number located on the frame of the unit; and 

 

The part description and the order number. 

 

Limitations on Warranty

: This Warranty does not cover any problems, damage or failure that are caused by accident, 

improper assembly, failure to observe cautionary labels on the product, failure to operate the product correctly, power grid 
failures or spikes from your local electricity provider, abuse or freight damage. Smooth Fitness does not warrant against any 
damage or defects that may result from repair or alterations made to the product by an unauthorized repair facility.    In order 
for this warranty to be valid, all Smooth Fitness exercise equipment must be stored and used in a fully finished and livable 
room within the residence (not including an indoor swimming pool room). 
 
This Warranty shall terminate if you sell or otherwise transfer this product. This Warranty does not apply to any product 
shipped or handled outside of the United States or Canada. This Warranty does not apply if the product is used as a rental 
product or in commercial use. Consequential and incidental damages are not recoverable under this Warranty. (Some 
states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion 
may not apply to you.) 
 
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES. ALL IMPLIED WARRANTIES, 
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE ARE LIMITED IN 
DURATION TO ONE (1) YEAR FROM THE EFFECTIVE DATE OF THIS WARRANTY. SMOOTH FITNESS IS NOT 
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN PARTS NOR FOR 

ANY BREACH OF EXPRESS OR IMPLIED WARRANTIES. SMOOTH FITNESS' SOLE LIABILITY UNDER THIS 

WARRANTY IS LIMITED TO THE TERMS DESCRIBED IN THIS FORM. THIS WARRANTY GIVES YOU SPECIFIC 
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. 
 

FORM WS-1 (rev. 03/2012) 

 

 

Summary of Contents for SMB-XBIKE




















Reviews: