background image

 

S

AFETY 

I

NSTRUCTION

” 

 

WARNING: To reduce the risk of serious injury, read the following safety instructions before using the 

item

 

 

1

. Read all warnings posted on the equipment.

 

2. Read this Owner's Manual and follow it carefully before using the equipment. Make sure that it is properly 

assembled and tightened before use.

 

3. Keep children and pets away from the equipment. Do not allow children and pets to use or play on the 

equipment .Always keep children and pets away from the equipment when it is in use.

 

4. Set up and operate the equipment on a solid level surface. Do not position the equipment on loose rugs or 

uneven surfaces.

 

5. Inspect the equipment for worn or loose components prior to each use.

 

6. Tighten / replace any loose or worn components prior to using the equipment.

 

7. Follow your physician's recommendations in developing your own personal fitness program.

 

8. Always choose the workout which best fits your physical, strength and flexibility level. Know your limits and 

train within them. Always use common sense when exercising.

 

9. Do not wear loose or dangling clothing while using the equipment.

 

10. Never exercise in bare feet or socks; always wear correct footwear, such as running, walking, or 

cross-training shoes.

 

11. Be careful to maintain your balance while getting on this product, using this product and getting off this 

product; loss of balance may result in a fall and/ or serious bodily injury.

 

12. The equipment should not be used by persons weighing over 300 pounds /136 kgs.

 

13. The equipment should be used by only one person at a time.

 

14. The equipment is for home use only.

 

15. Maintenance: Replace the defective components immediately and / or discontinue the use of the equipment 

until it is repaired.

 

16. Make sure that adequate space is available for access to and passage around the equipment; keep at least a 

distance of 1 meter from any obstruction object while using the machine.

 

17. If you feel faint or dizzy, discontinue use of this equipment immediately.   
18. Serious bodily injury can occur if this equipment is not assembled and used correctly. Serious bodily injury 

can also occur if all instructions are not followed. 

 

19. Keep children and pets away from equipment when in use. Always make sure all bolts and nuts are 

tightened prior to each use. Follow all safety instructions in this manual

 

WARNING: 

Before starting any exercise or conditioning program you should consult with your personal physician to see if you require a 

complete physical exam. This is especially important if you are over the age of 35, have never exercised before, are pregnant, or suffer from 

any illness 

 

READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOWTHESE 

INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY 

Summary of Contents for SMB-XBIKE




















Reviews: