SMOOTH 9.25HR MOTORIZED TREADMILL
Visit us at:
www.smoothfitness.com
32
TROUBLESHOOTING
Troubleshooting
NOTE
: Do not touch any internal electric wires without consulting the manufacturer.
No display on the Computer LED, after the power is switched on
:
1. Make sure the power cord has been plugged in properly to the power switch on the base frame and mains power socket.
2. Make sure the safety key is inserted properly into the safety key slot on the console. Try pulling it in and out several times
until the LED lights up.
Computer LED lights up but the running belt has no movement
:
1. Follow the console operating instructions for the QUICK START manual program then press the Start button to see if the
belt will move. The belt should move at 0.5 miles per hour.
2. If the belt still does not move, press the Speed Up button and see if the speed LED window indicates the speed
increasing.
3. If when you press the speed button the speed LED window indicates the speed increasing, but the belt still does not move
please call Customer service at 1.888.800.1167.
Treadmill will not start
:
1. Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet
and the surge protector is turned on (refer to the Power Requirements section in this manual).
2. Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes then press
the rest switch.
3. Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has tripped,
reset or have an electrician replace the breaker in home.
4. Have an electrician check for inadequate voltage at the outlet.
Treadmill looses power during use
:
1. Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes then press
the rest switch. If the treadmill still will not operate, please call Customer service at 1.888.800.1167.
2. Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has tripped,
reset or have an electrician replace the breaker in home.
Treadmill walking belt slows during use
:
Check to make sure the treadmill is securely plugged into an UL-listed surge protector, rated at 15 amps, with a 14-guage
cord of five feet or less and the surge protector is securely plugged into the outlet. If the treadmill still will not operate, please
call Technical service at 1.888.800.1167.
Treadmill walking belt slips or is not centered on rear roller
:
Refer to the Belt Adjustment section of this manual. If you require additional assistance please call Technical service at
1.888.800.1167.
