28
V 390 SEMI-RECUMBENT BIKE
GENERAL INFORMATION
THE SEAT ANGLE ADJUSTMENT
a. Adjust The Seal Angle
:
1. Determine the seat angle that you prefer. On the
Inner Seat Carriage Slider (3)
there is a numbered scale
from
1 to 5; from 9 to 45 degree (9 degree increment)
2. L
oosen the
Pull Pin (29)
by turning it
counter-clockwise
3. Use your one hand to pull the
Pull
Pin (29)
outward
while use the
other hand to put your fingers into
the hand grip, located on the back
of the
Rail Cover (54,55),
to slide
the
Inner Seat Carriage Slider (3)
upward or downward to the proper
seat angle. Release the pin when
the preferred angle is achieved.
4. Make sure the pin on the
Pull Pin (29)
locks into position then turn
the clockwise to tighten.
b. HORIZONTAL ADJUSTMENT OF THE SEAT:
1. After adjusting the seat angle, you
will need to adjust the seat pad
horizontally.
2. Behind the
Seat Carriage Cover
(48, 49)
, there is a number scale
from 1 to 5. The number is designed to match the number of the
Inner Seat
Carriage Slider (3)
3. To adjust the seat horizontally, pull the
Locking Pin (47)
outward and adjust the
Seat Cushion (42)
upward or downward until the seat is horizontal. Release the
Locking Pin (47)
to lock the seat.
When the pin click in position the seat is locked.
