27
11. CLEANING, MAINTENANCE, STORAGE
After treatment, always switch off SmoothSkin Bare Fit by unplugging from the electrical oulet.
After use, the handset, skin tone sensors and treatment window should
be inspected for damage and wiped down with a dry, lint free cloth.
WARNING:
The glass filter can get hot during use.
DO NOT
touch or
clean the filter for at least 5 minutes after use to allow it to cool down.
NEVER
use water or other cleaning fluids, as these can damage the
device leading to a potential safety hazard.
If necessary, the Reflector and Skin Tone Sensor can be carefully cleaned
by using a slightly damp cotton bud.
Store SmoothSkin Bare Fit in a cool, dry place. Make sure that the
treatment window and skin tone sensor on the handset are protected
from damage.
Regularly check the device (including cords) for visible signs of damage. In case of damage or cracks, stop using the device -
and visit the website for support details.
Skin Tone
Sensor
Reflector
12. TRAVELLING WITH SMOOTHSKIN BARE FIT
The Power Supply unit of the SmoothSkin Bare Fit is universal and will work with all commonly encountered mains supplies.
Providing you have a suitable adaptor for the mains power cable plug, the SmoothSkin Bare Fit will operate as normal.
