p. 16
WARNING!
Do
NOT
install
WINDOWS
UPDATES
and reduce other updates to a minimum, to avoid software conflicts with Photo Booth
program.
A
complete
software
manual
in
English,
covering
150
pages,
is
available
here:
Once the camera is in M mode, you can set all the
parameters using camera buttons.
Following our experience, we suggest you to
start with:
[1] Tv: 1/100
[2] Av: 6,3
[3] ISO: 400
[1] Tv, a shutter speed – determines sharpness of the photo. In fact, below 1/80, it would
be difficult to take a clear photo. Recommended Photo Booth settings: 1/80 - 1/200.
[2] Av, aperture value – determines a dose of light reaching to the matrix – lighter photos
with maintained sharpness level. Recommended Photo Booth settings: 5,6 – 7,1.
[3] ISO, sensitivity of camera’s sensor to light – Higher ISO value means lighter photo but
results in lower value colour mapping and visual distortion (noise). Recommended Photo
Booth settings: 400 – 3200.
