6
3.
S
ETTING UP THE
V
ET
G
UARDIAN
1.
Unpack the contents of the box
2.
The Device Arm is already connected to the Piranha-Lox® mount
3.
Unpack the TP_Link ®Hotspot Router and plug it to the wall socket within the room. (
Note:
The TP-Link DOES NOT connect to anything else).
4.
Unpack VetGuardian (Contained in the smaller box) and mount the bottom of the device to the
Device Arm.
5.
Warning! The screw-insert of the VetGuardian is glued in. So be careful when you mount the
device to the arm. Any sudden movements, the screw insert may come off. Please mount it
until the flat portion on the arm is flush with the device base. Future models will have better
clamped screw-inserts.
