91
PASSWORD PROTECTION
Writes to SD card, writes to internal memory, and the headphone limiter threshold can be password
protected. This will be of interest mainly to organisational users concerned about property and
liability. The feature should not be used casually, since
there is no override and special firmware
would be required to reactivate a Realiser whose password is forgotten.
The password and protection options are stored in the clock module, which is powered by an internal
rechargeable battery. If the Realiser is left without external power for extended periods, the battery
will run down and power to the clock will eventually be lost, resetting the time/date and the password.
To set the password options, press
(!)
. The screen will say:
>SAVE SYSTEM CONFIG
UPDATE REALISER SW
CONTROL MENU
PASSWORD OPTIONS
Choose
PASSWORD OPTIONS
. The screen will say:
> WRITE TO SD:N
ALTER PRESETS:N
OVERWRITE FILES:N
ALTER LIMITER:N
Use the ^ and
v
keys to choose the option and the < and > keys to set each option to
Y
or
N
.
WRITE TO SD
-- Covers any write to the SD card including PRIR, HPEQ, and preset files,
and the
BACKUP
operation.
ALTER PRESET
-- Covers loading, saving and erasing presets.
OVERWRITE FILES
-- Covers writing PRIR and HPEQ files to internal memory, and erasing
those files. This includes
INTERNAL>INTERNAL
and
SD>INTERNAL
transfers. It does
not
interfere with writes to PRIR or HPEQ location 64 following a measurement.
ALTER LIMITER
-- Blocks access to the headphone limiter menu (
MENU-METR-HP
LIMITER
). The limiter can be used to cap headphone volume, protecting the headphones and
listener.
To set the password, press
MENU-9
. The
ENTER PRIR DETAILS
and
ENTER HPEQ DETAILS
screens may or may not show content; simply press
OK
after each screen. The third screen will say:
PASSWORD SETUP
OLD
NEW
If a password is not in effect, enter nothing in the
OLD
field. (It already contains the default of eight
spaces.) Enter a 1-8 character password in the
NEW
field, using the number keys for text entry. (See
Text Entry for details.) Press
EXIT
to complete.
If you wish to change the password, repeat the steps above and provide both
OLD
and
NEW
entries.
