1. Rotate the bearings and wheels to check if they are rolling
smoothly.
2. Disassemble, clean, and add lubricate every 6 months paying
extra attention to moving parts, clearing them of grit and dirt
so they move freely. When replacing parts, please ensure the
parts specifications match that of the dealers.
3. Mare sure the front fork and wheels are fixed tightly, using a
wrench to tighten the locking nut properly. Use firm pressure
but don’t over tighten.
4. The PU wheels may be worn out after some time of use,
contact the seller to replace new PU wheels for a safe ride.
5. The wheels and wheel bearings can become worn after
regular use and can be replaced easily. Remove the axle bolts
with two Allen keys and slide the wheel off its fork. Replace
with the new item, screw in the bolt through the aligned fork
and wheel, then tighten with an Allen key on either side to
tighten securely.
6. Wipe with a damp cloth to remove dirt and dust. Do not use
industrial cleaners as they may damage the surfaces. Do not
use alcohol, alcohol-based, or ammonia-based cleaners as
they may damage or dissolve some components or soften the
decals or the grip surface adhesive.
7. Make sure all components are assembled and secured sturdily
before each use.
8. Self-locking nuts and other self-locking fixings may lose their
effectiveness over time. If any of these components are no
longer functioning how they should be, it is strongly
recommended to discontinue the product’s use and seek
replacement parts from the dealer or importer of this product.
Maintenance
Smyths Toys HQ UC / Smyths Toys EU HQ UC
ROI: Lyrr Building 1, Mervue Business Park, Galway, Ireland, H91K4HV
UK: Lymedale Business Park, Newcastle under Lyme, UK, ST5 9QH
