10
CHANGING THE OPENING DIRECTION OF THE DOORS
It is recommended that changing the opening direction of the doors should be done
with a helper. You will need two spanners No. 8 and No. 10 and a Philips head
screwdriver.
When changing the opening direction of the doors YOU CAN NOT lay the
refrigerator horizontally!
Do the actions below in the order they are listed :
WARNING! Turn off the appliance and pull the plug out of the electricity
supply socket.
1.
Unscrew fixing srews
2
and
3
and
remove the top table.
2.
Unscrew and remove the upper door
bracket
5
, unscrew the axle together
with the nut and washers and screw
all this set on the reverse bracket
side.
3.
Remove the upper door
6
. Uncrew
fixing screws
7
of the middle bracket.
4.
Remove the middle bracket together
with washers on the axle and the
spacer.
5.
Remove the bottom door
8
. Unscrew
and remove the bottom bracket
9
,
unscrew the axle, upturn the bracket
and the axle and srew them on the
reverse side. Screw and fix the
bottom bracket.
6.
Remove the plug
10
from the upper
door and the plug
10
from the
bottom door and place them on the
reverse side.
7.
Remove the plugs
11
from the
crossbar and place them on the
reverse side.
8.
Hang the bottom door
13
on the axle
15
of the bottom bracket
14
.
9.
Before screwing the middle bracket
7
together with the set of washers and
spacers on the reverse side, insert
the bracket axle into the bottom
door.
10.
Hang the upper door
8
on the axle of the middle bracket
9
.
11.
Before screwing the upper bracket
5
together with the set of washers and spacers,
insert the axle of the bracket into the upper door
7
. Put the top table and fix it with
screws
2
and
3
.
