9
CHANGING THE OPENING DIRECTION OF THE DOORS
It is recommended that changing the opening direction of the doors should be done with a
helper. You will need two spanners No. 8 and No. 10 and a head screwdriver.
When changing the opening direction of the doors YOU CAN NOT lay the refrigerator
horizontally!
Do the actions below in the order they are listed:
Turn off the appliance and pull the plug out of the electricity supply socket.
1.
Remove the bracket (5) and
its washers from the axle.
2.
Unscrew the axle together
with its washers from the
bracket (5) and screw it into
the second aperture of the
bracket (5).
3.
Remove the refrigerator door
(6).
4.
Change the opening direction
of the freezer compartment
door: open the door (7),
undo the screw (8), and
remove the plate (9).
5.
Undo the screw (10) and remove the bracket (11).
6.
Pull the door (7) downward and remove it.
7.
In the places indicated on the other side of the refrigerator compartment, drill two 2.3-
mm-wide holes and attach the plate (9) on the right-hand side.
8.
Turn the door upside-down (180 º) and place the upper axle of the door in the gap on
the left-hand side of the refrigerator compartment and hang the bracket (11) on the
bottom axle of the door. Attach the bracket (11) in the newly drilled hole.
9.
Check that the door latch catches on the hook of the plate (9).
