5
comes down. If the appliance is tilted slightly backward – the doors will close by
themselves.
Preparing for operation:
•
It is recommended to prepare the appliance for operation with a helper.
•
The apppliance must only be transported in its vertical position; do not tilt any more than
30°.
•
Remove package. Lift the appliance away from foamed polystyrene base. Tear off
adhesive tapes. Remove all red-coloured parts from the shelves
and coloured adhesive tapes from the door trays
•
When placing, moving, lifting the appliance, do not hold
the door handles, do not pull the condenser at the rear
part of the refrigerator and do not touch the
compressor unit.
The appliance should not be connected to the mains until
all packing and transport materials aren’t removed. Suitably dispose the packaging
material.
First use:
•
Before using the appliance for the first time, the interior and all internal accessories
should be washed with lukewarm water and some neutral soap to remove the typical
smell of a brandnew product, then dried thoroughly.
•
Once the unit has been positioned, wait for about 30 minutes before it is connected to
the mains.
If the unit has been tilted more than 30° during transport: wait at
least 4 hours before connecting the appliance to the power
supply. If this is not done, the appliance compressor may fail.
•
When first starting-up or after a period out of use, before putting the products in the
compartment let the appliance run at least 2 hours.
DESCRIPTION OF THE APPLIANCE, BASIC PARTS
