6
C H A N G I N G T H E O P E N I N G D I R E C T I O N O F T H E D O O R S
It is recommended that changing the opening direction of the doors should be done with a helper.
You will need two spanners No. 8 and No. 10 and a Philips head screwdriver.
!
When changing the opening direction of the doors, YOU CAN NOT lay the refrigerator
horizontally. Do the actions below in the order they are listed:
W A R N I N G ! Turn off the appliance and pull the plug out of the electricity supply
socket.
1.
Remove the covers
c
from the body of the refrigerator and of the inner side of the door. Also
remove the upper bracket
6
together with the nut and washers and the spacer under the
bracket.
2.
Remove the door of the refrigeration compartment. Remove the stopper
5
from the bottom of
it. On the other side of the door, attach the stopper intended for doors that open on the left
(you will find it in the packet).
3.
Remove the middle bracket
4
together with the washers on the axle and the plastic spacer.
4.
Remove the freezer compartment door
3
. Remove the bottom cover
1
.
5.
Unscrew the axle
2
from the bottom bracket
7
and transfer it together with all washers to the
other side of the cabinet by screwing it to the bracket
7
symmetrically to former position.
6.
Remove the covers
8
from the partition separating the refrigeration compartment from the
freezer compartment and place them in the apertures on the other side.
7.
Hang the freezer compartment door on the axle of bracket
7
.
Summary of Contents for RF31SM
Page 1: ......
