background image

Prepara�on

How to use

A�en�on!

• Do not add water repeatedly to the appliance. Add water un�l the water 

indicator flash.

• Do not let foreign objects such as dust or dander into the water tank.

• Do not hold down the bu�ons for a long 

�me to avoid malfunc�ons.

• Do not operate the control panel with wet 

hands or splash water on the control panel, 

otherwise it will cause a fail func�on.

Use only dis�lled or purified water.

Due to different water quality, it may shorten the lifespan of this product. 

Therefore, we recommend to use dis�lled or purified water. They are general

-

ly available in supermarkets.

The following types of water cannot be used because they contain high 

minerals.

• Tap water            • Geothermal water          • Groundwater
• Mineral water    • Acidic water                     • Ionized alkaline water

Do not incorporate any other substances.

Do not mix any other substances into the water, such as lo�on, aroma�c oil, 

etc.. Otherwise, it may cause burns, malfunc�on or shorten the lifespan of 

the product.

1. Place the product on a flat surface.

• When using, place the body on a flat, solid 

surface such as the floor.

• When the product body is �lted, the water 

in the water tank cannot supply water to 

the product, therefore, steam cannot be 

released.

2. Take out the water tank from the product.

• Press firmly on the water tank (image A), 

and when it pops out, pull out the water 

tank (image B).

3. Turn and open the water tank cover.

4. Pour water into the water tank (image C), 

and then �ghten the water tank cover.

• If the water tank is filled, the steam lasts 

about 35 minutes.

5. Install the water tank to the product 

(image D).

• Put the water tank into the product body 

un�l it has a click sound.

• When the water tank is installed into the 

product body, it will supply water for the 

product and the water in the water tank will 

decrease.

1.Insert the power plug of the product into a household power outlet.

• When the amount of remaining water is insufficient, the steam release  

method will change. This is not a malfunc�on.

• If the water in the water tank is used out, steam will be stopped. Please add 

water in �me. Please unplug the power plug if not in use.

2.Press the power bu�on on the opera�on 

panel to start the massage.

• This product is controlled by touch keys, and 

can be operated by touching the posi�on of 

each symbol on the keys (except the water 

indicator).

ATTENTION!

Summary of Contents for MT761











Reviews: