Foot bath bag
A�er use
Power Bu�on
Startup:
Press it to turn on the product in standby mode. The default se�ng is
[Rolling Massage-Low Level] [Heat -Low Level] [Timer - 10 minutes]; The
corresponding indicator in the panel will be on.
Stop:
Press it to turn off the machine during working mode; When the �mer
expires, all massage ac�ons and hea�ng func�ons will be stopped and enter
into standby mode.
Heat Bu�on
There are three levels heat temperature to choose, which can adjust the
suitable temperature. Pressing different bu�ons to choose desire tempera
-
ture, and the corresponding light indicator is on.
(The fan con�nues to work for 30 seconds a�er turning off the heat func�on)
Rolling Bu�on
The default is low-speed rolling massage speed with green light indicator is
on; press the bu�on again to turn the massage speed to high speed, the red
light is on; press the bu�on again, the rolling massage func�on stops and the
two-color light turns off.
Timer Bu�on
The default �me is 10 minutes. During the �ming, press the corresponding 10
minutes or 20 minutes bu�on, and the �me will be re-�med. When the �me
expires, the product is in the standby condi�on.
Lack of Water Indicator
When the water tank is lack of water, the heat func�on cannot be turned on
and the buzzer sounds to remind of adding water. The indicator of water will
flash 30 seconds and then be off.
• When the amount of remaining water is insufficient, the steam release
method will change. This is not a malfunc�on.
• If the water in the water tank is used out, steam will be stopped. Please add
water in �me. Please unplug the power plug if not in use.
• In order to prevent the solid materials from blocking the pipe, be sure to
use a bag or a hand-�ghtened bath bag to avoid blocking the leak.
• A�er use, please take out the bath bag and clean the foot pedal.
When using a foot bath bag, please open the cover of the foot bath bag
posi�on, and then place the bundled foot bath bag in the box.
ATTENTION!
1. Press the power bu�on on the control
panel to turn off all func�ons.
2. Unplug the power plug from the
household power socket (image ①).
3. Press and hold the drain key (image ②)
to drain the water in the water tank.
