Clean
Use cloth to wipe
the product body
Clean the power cord set
• Clean once a month.
• Unplug the power plug from the household
power outlet, and wipe off dust, etc.
with a dry cloth.
4. Pull out the waste water box from the
product (image ③), and pour out the
remaining water. Please pour out the
remaining water in the water tank to ensure
the product is clean. Otherwise, water marks
or odors may be generated. While pressing
the drain key, pay a�en�on to the water
volume of the waste water box to prevent
overflow.
5. Pour out the water in the waste water box
(image ④). Otherwise, water marks or
odors may be generated. When pouring
water, hold the waste water box and avoid
contact with hot water, otherwise, it may
cause burns.
6. Install the waste water box (image ⑤). Push
the waste water box into the product un�l it
clicks.
7. Clean the foot pedal (image ⑥). Take the
foot pedal out of the product and wash it
with clean water.
8. Wipe the water above the product body.
When not using the product for a long �me
(a few weeks or more �me), the water in the
water tank and the product body should be
completely removed. Store it a�er the
product body is sufficiently dry.
Clean the inside of the product
• Clean once a month.
• In order to remove and prevent scale deposits, the appliance should be
allowed to cool for at least 10 minutes a�er use, and then cleaned
according to the following steps.
Wipe the water from the body and water tank.
• Even a�er draining, there will s�ll be remaining water in the appliance.
This will not cause hygiene problems because the water will be boiled
when the next �me use.
Clean the product body
Do not wash or soak the product body in water.
• Use a cloth dampened with soapy water to wipe the product body.
• Never use alcohol, thinner, benzine or nail polish remover. Those material
may cause product malfunc�on or cracking or discolora�on.
Do not flush the body
directly with water
Do not �lt or invert the
product to drain water
14
15
