3
Setup and Operation
1. Attach the massager to a chair with elastic straps or place it on other support.
2. Connect the adapter cable to the corresponding cable on the cushion.
3. Plug the home adapter into an outlet or the car adapter into your car’s power receptacle.
4. Turn on the device using the controller ( instructions on page 5 ).
5. When finished place the controller in the pouch at the side of the cushion.
6. You may soften the massage pressure by placing a towel between yourself and the device.
• For your own safety we equip the massager with a protection against over-heating.
Heat is created in the motors when placed under great stress and excessive pressure. Before
this could create any risk and after a runtime of 15 Minutes. The massager will switch off
automatically and will only allow switching on again after an appropriate downtime.
• Likewise, you should allow your body some rest periods. To avoid straining your muscles too
much, we recommend to not exceed a continuous massage of 15 Minutes.
• Remove the adapter from the outlet when not in use.
• Do not setup or use the massager in a bathroom or similary wet / damp areas.
• Do not use this device while driving.
