188
7-33
7-34
7-36
7-37
7-35
4
6
3
1
2
Operation
The OPTIMISATION “9” screen (Fig. 7-33) is displayed.
Fig. 7-33 OPTIMISATION “OP.9”
START is signalled on the screen.
—
Spinn the wheel.
A measuring run is performed.
The screen OPTIMISATION “10”, outside (
Fig. 7-34
)
or the screen OPTIMISATION “10”, inside (
Fig. 7-36
)
is displayed.
Reading H 0
Optimum condition has been achieved and cannot be
improved.
Continue as shown on screen BALANCING
(
Fig. 7-14
).
Reading H 2
a)
Wheel running conditions cannot be improved.
Press
ESC
or
STOP (3,6, Fig.7-35)
to quit
Optimisation.
b)
However, it is possible to readjust the tyre relative to
the rim to obtain a quite considerable minimisation of
balance weights (i.e. smaller weights) without having
an adverse effect on wheel running conditions.
Press
MINIMISATION (4, Fig.7-35)
Splitting faults
At this stage of the program the faults index is available
(
Fig.7-37
).
Two values appears, indicating how the total wheel
unbalance is split as a percentage between the
rim and the tyre;
1
= % unbalance attributable to the Tyre
2
= % unbalance attributable to the Rim
—
Continue as shown on screen OPTIMISATION
“10” (
Fig. 7-38
).
..
_
..........
