15
EEWB330B
4.3.2
SAPE ARM POSITIONS FOR ALU
WEIGHTS PLACEMENT
Fig. 18
shows the corrected reading positions of the
SAPE arm (
1
), depending on the required weight
positions (
2
); adhesive weights and clip-on weights.
Weight Placement illuminated indicators indicate the
weights placement positions on the rim.
—
= SAPE arm application point (
1
).
= resulting in weight position (
2
).
Normal
Touch the SAPE arm to the rim flange (
a
).
Manually input the rim width dimension. This
mode require the clip-on weights placement.
Alu 1
Touch the SAPE arm to the rim flange (
a
).
Manually input the rim width dimension. Press
once the
Alu
key (
9
). This mode uses the
standardized adhesive weights placement.
Alu 2
Touch the SAPE arm to the rim flange (
a
).
Manually input the rim width dimension. Press
twice the
Alu
key (
9
). This mode uses the
standardized adhesive weights placement.
Alu 3
Touch the SAPE arm to the rim flange (
a
).
Manually input the rim width dimension. Press
three times the
Alu
key (
9
). This mode uses the
standardized weights placement
.
Alu 4
Touch the SAPE arm to the rim flange (
a
).
Manually input the rim width dimension. Press
six times on the
Alu
key (
9
). This mode uses the
standardized weights placement
.
Alu 5
Touch the SAPE arm to the rim flange (
a
).
Manually input the rim width dimension. Press
seven times on the
Alu
key (
9
). This mode uses
the standardized weights placement
.
Alu 1P
Touch the SAPE arm to the rim fl ange (
b
). Press
once the
Easy Alu Toggle
key (
9
).
Manually input the rim width dimension.
- The internal correction plane for adhesive
weights is precisely indicated by the machine.
Note
:
Make sure all entries are completed prior to
balancing spin.
Alu 2P
Perform the SAPE arm detection in (
b
-
c
) points.
- The adhesive weights are placed where the
readings are taken, according to the reading
positions.
Alu 3P
Perform the SAPE arm detection in (
a
-
c
) points.
- The adhesive weight is placed where the
reading is taken, according to the reading
position.
Note
: The
Easy Alu Toggle
key (
6
), can retrieve an
alternative ALU P mode.
9
Figure 18
Summary of Contents for EEWB330B
