Page 14
Operation Manual
3.0 CONTROLS
1102
Figure 3.0-1
Before operating the machine, take the time to familiarize
yourself with the operation and function of all the controls
(Figure 3.0-1).
A
Press down and release, the fi rst pedal from the left:
the column tilts backwards.
Press again: the column tilts forward.
B
Press down and release the second pedal from the
left: the jaws of the turntable will retract. Do it again:
the jaws will expand. If you press the pedal prior to
the end of the stroke and release, the jaws may be
stopped in any position.
C
Press down and hold, the second pedal from the right:
the turntable turns clockwise.
1.
3/4 down approximately, the turntable rotates at
the minimum speed (7 RPM). The torque is maximum
in this condition.
2.
All the way down the turntable rotates at the
maximum speed (14 RPM).
Lift the pedal and the turntable turns counter-
clockwise (7 RPM).
D
Open the bead breaker arm. Press down and hold the
fi rst pedal from the right: by doing this you operate the
bead breaker blade and the arm will move towards
the machine. Release the pedal: the bead breaker
blade will retract.
442
441
WARNING!
ALWAYS KEEP ARMS AND LEGS AWAY FROM THE
BEAD BREAKER STROKE!!
E
The push button on the handle allows to release the
arms and position the mount/demount tool in the
correct position.
*
Mount/dismount head laser guide next to the handle
acts as a visual guide when indexing the demount
head to the wheel’s edge quickly and easily,
eliminating wheel contact. See Figure 3.0-2
A
B
C
D
E
*
Figure 3.0-2
EEWH326A Air-Electric Tire Changer
