25
Chapter 5
Scanner Operations
The scan tool establishes a data link to the electronic control systems of the vehicle being
serviced. This allows you to retrieve diagnostic trouble codes (DTCs) view live data parameters,
and perform tests. Vehicle testing requires connecting the scan tool to the test vehicle using the
data cable and test adapters. On screen instructions tell you how to connect the scan tool.
Additional connection information can be found in the appropriate vehicle communication
software manual for the test vehicle.
5.1 Vehicle Identification
The scan tool information presented is provided by the ECM of the vehicle being tested.
Therefore, certain attributes of the test vehicle must be entered into the scan tool to ensure the
data displays correctly. This vehicle identification sequence is menu driven, simply follow the
screen prompts and make a series of choices. Each selection advances you to the next screen.
Exact procedures may vary somewhat by the make, model, and year of the test vehicle.
z
To identify a vehicle for testing:
1. Tap the
Vehicle Manufacturers
button from the Home screen.
A list of manufactures displays (
Figure 5-1
Sample manufacturer list
2. Select the manufacturer of the test vehicle from the list.
A model year menu displays.
3. Select the year of the test vehicle from the menu.