57
Tools
Tools Menu
•
is used to configure the tool to operate on rechargable or disposable batteries.
•
is used to configure how long the screen remains lit when the tool is idle.
Settings options are described in the following sections.
Brightness
Selecting this option opens the brightness setting screen, which allows you to adjust the back
lighting (
Figure 8-3
Sample brightness setting screen
z
To adjust brightness:
1. Tap the
Plus
button on the touch screen, or use the up (
b
) arrow on the scan tool to increase
the screen illumination.
2. Tap the
Minus
button on the touch screen, or use the down (
d
) arrow to decrease screen the
screen illumination.
Each tap or button press incrementally changes the display screen back lighting.
3. To exit: select
Back
or
Home
from the toolbar, or press the
N/X
(cancel) button.
Touch Calibration
Calibrating the touch screen maintains the accuracy of the touch-sensitive display screen.
Perform the following procedure on a routine basis to keep your scan tool in good working order.
z
To calibrate the touch screen:
1. Select
Tools
from the Home screen to open the menu.
2. Select
Settings
from the menu.
3. Select
Calibrate Touch Screen
from the menu.
The first calibration screen opens (