38
Operations
Viewing Data Graphically
Figure 5-24
Sample manually scaling a parameter
3.
Use the down
d
arrow to move the maximum displayed value into position.
4.
Press
Y/
a
to set the selected value.
5.
Press
Y/
a
to scale the minimum value.
6.
Use the up
b
arrow to move the maximum displayed value into position.
7.
Press
Y/
a
to set the selected value.
8.
Press
N/X
to exit manual scale.
The top and bottom of the graph is now clipped so that only the portion that falls between the
selected minimum and maximum values displays.
z
To scale all parameters:
1.
Select a parameter.
The parameter menu displays.
2.
Select
Scale All
.
The minimum and maximum graph values are reset for all of the parameters.
z
To set trigger levels:
1.
Select a parameter.
The parameter menu displays.
2.
Select
Set Trigger Levels
.
The active trigger level line displays as a solid black line together with an on-screen position
value (Figure 5-25).
Figure 5-25
Sample active trigger line
NOTE:
i
Both an upper and lower trigger level must be set.
3.
Adjust the upper trigger level using the up
b
and down
d
arrows to place the trigger level line
where you want it on the PID graph.
Summary of Contents for Solus
Page 1: ...User Manual August 2009 EAZ0007E76F Rev A ...
Page 87: ...80 Index ...