70
5-33
5-34
5-35
5-36
5-37
Operation
5.10.3 Start optimisation/weight
minimisation.
Procedure:
—
Make sure the tyre is correctly mounted on
rim and infl ated to specifi ed infl ation pressure
(mounting guide rib of the tyre must be correctly
seated).
—
Clamp the wheel.
—
Enter correct rim dimensions, or check existing
inputs for correctness.
—
Press the
START
key after wheel protection closing
.
—
Starting from the main menu press the menu key
F6
Optimisation menu (
Fig. 5-33
).
The OPTIMISATION MENU “OP.1” screen (
Fig. 5-34
)
is displayed.
If an optimisation/weight minimisation result has
already been saved, press the
F4
key (
Fig. 5-35
);
The
program then continues from the step 4, 6 or 10 where it was
interrupted, with the relative measurement values and the
balancing optimisation / weight minimisation may continue.
Start weight minimisation
—
Press the menu key
F2
(
Fig. 5-34
).
The MINIMISATION “Un.4” screen is displayed (
Fig.
5-36
).
Start weight optimisation
—
Press the menu key
F1
(
Fig. 5-34
).
The OPTIMSATION “OP.2” screen (
Fig. 5-37
) is
displayed.
Continue opimisation or weight minimisation
—
Press the menu key
F4
(
Fig. 5-35
).
Resumes the previously interrupted process.
