91
Scope and Multimeter Operations
Getting Started
The non-shielded red lead (
) is used for either Channel 4 or Digital Meter plus (+). The
lead color matches the color of socket 4 on the Scope Module, as well as the color of trace 4 on
the test screen.
Alligator Clips
Figure 8-8 Alligator clip
Insulated alligator clips, colored to match each test lead, are included. A black clip for the common
ground lead is also supplied (
). Each clip plugs into the straight end of a channel lead.
Test Probes
Figure 8-9 Test probe
Two test probes are included, one black and one red (
). The test probes plug into the
straight end of the test leads.
Secondary Coil Adapter Lead (optional)
Figure 8-10 Secondary Coil Adapter lead
The optional Secondary Coil Adapter lead (
) connects to the clip-on secondary wire
adapter, coil-in-cap adapter or coil-on-plug adapter to display secondary waveforms.
Secondary Ignition Clip-on Wire Adapter (optional)
Figure 8-11 Secondary Ignition Clip-on Wire Adapter
