181
Maintenance
Diagnostic Tool
Replacing the Battery Pack
If the battery pack no longer holds a charge, contact your sales representative to order a new one.
IMPORTANT:
Replace the battery pack with original Snap-on replacement parts only.
z
To replace the battery pack:
1.
Loosen the two battery pack screws.
2.
Carefully raise the battery pack up and remove.
1— Battery Pack
2— Battery Pack Screws (2)
Figure 17-1 Battery pack location
3.
Align the new battery pack into position, making sure it is fully seated.
NOTE:
NOTE:
i
Do not overtighten the battery pack screws.
4.
Tighten the two battery pack screws.
99 0$;