C12
17
18
Vehicles with ISOFIX anchorage systems:
Click
Click
Step 1: Clip the two insert guides with the
cut-out facing upwards onto the two
ISOFIX attachment points of your vehicle.
Tip:
ISOFIX attachment points are between
the seat and backrest.
Step 2: Place the car seat forward facing on
the vehicle seat. Press the ISOFIX unlock
button and push both ISOFIX locking arms
into the insert guides, until they engage on
both sides and you hear a “click” sound.
The locking arms are only correctly engaged
if both of the indicators on the ISOFIX
unlock buttons are green.
Step 3: Pull the vehicle seat belt and pass
the vehicle shoulder belt through the seat
belt slot on the headrest. The vehicle lap
belt should go through the gap between the
car seat backrest and armrest.
×
√
➀
➁
Step 4: Pass the vehicle belt through the
back of the inner cushion to the other side
and fasten the seat belt into the buckle
until you hear a “click” sound.
Notice: The vehicle shoulder belt ➀ and the
vehicle lap belt ➁ should be placed behind
the inner cushion.
Step 5: Tighten the vehicle seat belt
according to the direction of the arrows.
Make sure the seat belt is tight and remove
any slack.
