13
14
Step 1: Clip the two insert guides with the
cut-out facing upwards onto the two ISOFIX
attachment points of your vehicle.
Tip:
ISOFIX attachment points are between
the seat and backrest.
Step 2: Place the car seat facing the vehicle
seat backrest. Press the ISOFIX unlock button
and push both ISOFIX locking arm into the
insert guides, until they engage on both sides
and you hear a “click” sound.
The locking arms are only correctly engaged if
both of the indicators on the ISOFIX unlock
buttons are green.
Step 3: Pull the vehicle seat belt and pass
the vehicle shoulder belt through the back
of the backrest. The vehicle lap belt should
go through the gap between the car seat
backrest and armrest (make sure the vehicle
lap belt has been placed behind the inner
cushion). Fasten the seat belt into the
buckle until you hear a “click” sound.
Step 4: When you pull out the vehicle belt, it
should go through the car seat’s blue belt
hook and the slot between headrest and
backrest.
Tighten the vehicle seat belt according to
the direction of the arrows. Make sure the
seat belt is tight and remove any slack.
Vehicles with ISOFIX anchorage systems:
Step 2: Place the car seat facing the vehicle
seat backrest. Make sure the front of the car
seat is resting firmly against the vehicle seat
backrest.
Click
Click
×
√
Step 3: Pull out the top tether and press the
release button on the top tether system to
lengthen the belt.
