16
www.SnapperPro.com
Operation
Figure 2. Seat Adjustment
A. Seat Adjustment Lever
Seat Adjustment
See Figure 2. The seat can be adjusted forward and
backward. Move the lever towards the left, position
the seat as desired, and release the lever to lock the
seat into position.
Figure 1. Checking Tire Pressure
Check Tire Pressures
Tire pressure should be checked periodically, and
maintained at the levels shown in the chart. Note
that these pressures may differ slightly from the “Max
Inflation” stamped on the side-wall of the tires. The
pressures shown provide proper traction, improve cut
quality, and extend tire life.
A
C
Figure 3. Mowing Height Adjustment
A. Cutting Height Adjustment Pin
B. Deck Lift Foot Pedal
C. Deck Lift Lock lever
A
B
Mowing Height Adjustment
The cutting height adjustment pin (A, Figure 3) control
the mower cutting height. The cutting height is
adjustable between 1-3/4” (4,4 cm) and 5” (12,7 cm)
in 1/4” (0,64 cm) increments.
1. Depress the deck lift foot pedal (B) until it locks
into the 5” (12,7 cm) position.
2. Place the cutting height adjustment pin in the
desired cutting height.
3. Depress the deck lift foot pedal then push the lock
lever (C) toward the right to release the lock.
4. Release the deck lift foot pedal until it comes to
rest against the cutting height adjustment pin.
Tire
Pressure
Fits Models:
psi
bar
Rear
15
1,03 All
Front
25
1,72 Models with pneumatic tires
Front
N/A
Models with flat free tires
Not
for
Reproduction
