6
PRE-OPERATION CHECKLIST FOR
SNAPPER GROUNDS CRUISER
Snapper has completed initial adjustments and performed operational tests prior to shipping the machine. Due
to the possible effects of shipping, handling and storage, Snapper intends for all of the following items to be
verified and necessary final adjustments made at time of setup. It remains good practice and is strongly
recommended that all the items also be checked prior to placing the machine into service. It is very important
that setup is verified and all operational tests completed and results are acceptable. After completing this form,
sign and retain for future reference.
SET-UP
_____ GENERAL INSPECTION for loose, missing or damaged components. Repaired as necessary.
_____ WHEEL LUG NUTS checked and torqued to 75 ft-lb.
_____ FRONT & REAR AXLE NUTS checked, castle nuts installed and secured with cotter pins.
_____ TIRE PRESSURE, FRONT AND REAR, adjusted to 15 PSI.
_____ SEAT BELTS installed, hardware tightened, and function of buckles verified.
_____ OPERATOR PROTECTIVE STRUCTURE installed and hardware torqued to 50-70 ft-lb.
_____ BATTERY activated, charged and installed properly.
_____ STEERING WHEEL installed, alignment checked and nut torqued to 50-70 ft-lb.
_____ CARGO BED AND PROP ROD installed and hardware tightened according to instructions.
_____ CARGO BED LATCH function verified.
_____ OPERATOR CONTROLS checked for binding and damage.
LUBRICATION AND FUEL
_____ ENGINE OIL added to bring level up to full mark (Refer to Engine Manual).
_____ TRANSMISSION FLUID checked and adjusted to full mark. (MOBILFLUID 424)
_____ AXLE COUPLINGS AND STEERING KING PINS greased. (Refer to Operator’s manual).
_____ FUEL added to tank and system checked for leaks. (Refer to Engine Manual for fuel specifications).
OPERATIONAL TEST
_____ ENGINE started, engine idles without dieing and runs smoothly.
_____ SAFETY INTERLOCKS checked and all function correctly. (Refer to Operator’s manual).
_____ TRANSMISSION shifts into forward and reverse without excessive grinding of gears.
_____ CLUTCH engages and accelerates smoothly and does not drag at idle.
_____ STEERING checked and functions properly.
_____ SERVICE BRAKE AND PARK BRAKE checked and both function properly. (Refer to Operator’s manual).
CONSUMER INFORMATION
Purchase Date ________________ Model_____________________ Serial No. ____________________
Retailer’s Name _______________________________ Signature ________________________________
Address _________________________________ City _________________ State ______ Zip _____
MACHINE WILL BE USED COMMERCIALLY? _ YES ____ NO
Purchaser’s Name _____________________________ Signature ________________________________
Address _________________________________ City __________________ State ______ Zip ______
IMPORTANT: This form is to be retained for future reference regarding Warranty, proof of
purchase, traceability for product recall or service, etc. Complete the Product Registration
Card and Mail to Customer Service Department at SNAPPER, P.O. BOX 1379, McDonough,
Georgia, 30253.
INSTRUCTION No. 7-4510 (I.R. 5/3/01)
