Instruction Manual No. 7102356 (Rev. C, 06/04/2008)
TP 200-5352-C-AT-N
5
Install Upper Elbow Tube and Middle
Grass Tube
1)
Slide the upper elbow tube
(1733885) into the cover, aligning the
ridges with the notches in the cover
opening. The opening of the elbow tube
must face towards the center of the
catcher. See Figure 7.
2)
Slide the clear middle tube into the
upper elbow tube. The handle on the
middle tube must be in line with the top
ridge on the elbow tube. See Figure 7.
Note:
For 42” decks, align the hole in
the clear tube with the hole nearest the
elbow in the upper tube, and secure
with supplied screw. See Figure 7.
3)
Slide the middle tube down over the
grass bag adapter. Pull the rubber strap
and place the hole in the strap
completely over the latch pin, securing
the middle tube to the grass bag
adapter. See Figure 8.
Install Baffles on 52” Deck (Not
required on other size decks)
1)
Position the left deck baffle
(7400267A) and right deck baffle
(7400268A) on the front inside surface
of the 52” deck. Align the holes and
insert carriage bolts (M720053) with the
threaded portion sticking out. Install
nuts (7090585) onto the carriage bolts.
Tighten securely. See Figure 9.
Note – some hardware securing the
front roller and gauge wheels will have
to be removed to install the baffles.
Figure 7
Figure 8
Figure 9
Align tube
handle with
elbow ridge
Opening of elbow
facing center of
catcher
Secure strap
on tube to pin
on adapter
Insert screw
(42” decks only)
