BTP-L42II User’s Manual
- 5 -
2 Printer installation
2.1 Installation position
Flatly place the printer on the operation table, which must be
waterproof, moistureproof and dustproof. The maximal tilted angle
should not exceed ±15° during installation.
2.2 Paper roll installation
1) Hold the cover open lever with both hands to turn the top cover
towards upwards, and then open the top cover of printer (see
figure 2.2.1);
Figure 2.2.1 Figure 2.2.2 Figure 2.2.3
2) Press the cover open lever in the direction of arrow (see figure
2.2.2). After the ribbon holder is uplifted, turn it upwards to the
angle as shown in the figure (see figure 2.2.3);
3) Install the paper roll onto the paper roll supporting pole, and add
a paper guide on both sides of paper roll (see figure 2.2.4);
