JK-W01 USER MANUAL
- 19 -
DHCP:
Disabled
Without security settings
Print test page
Select the printer in list box and click the button “Print Test Page” in
main window, then you could print out test pages with printer, of
which include the parameters of JK-W01 module.
Print restoration functions
After modifying the configuration, a prompt shall be given and click
“Reboot Device” button to effect the configuration; If users need to
disable the modification at once, click “Reboot Device” button and a
pop-up window shall be given. Click ‘OK” button to reset the printer
and click “Return” button to exit the confirmation window. When not
restoring the printer, you can continue to modify other parameters.
5.5 Executing printing function
Printer driver should be installed according to the description in
printer user’s manual and selects serial interface. After installation,
the port of printer driver is reset to be network port. The following
shows how to configure network port with BTP-2002NP printer
under WindowsXP operation system:
1) Click BTP-2002NP printer icon installed, then open properties
column as shown in Figure 5.5.1;
