IQCAG00
RollCall Control Panel
Issue 1 Rev 1
Page 17
© 2017 SAM
5.3.1 IP Address Settings
Enter suitable
Unit IP Address
,
Subnet Mask
and
Default Gateway Address
values, and
click
S
to save. If necessary, saved settings may be recalled later by clicking
P
.
Your network administrator should be able to provide IP configuration information.
When complete, restart the module by clicking
Restart
on the
Setup
page (see section 5.6).
5.3.2 Traffic Statistics
Information on traffic sent or received via each interface is displayed to the right of the page.
Select an
Update Rate
as required. Values can be cleared down by clicking
Clear LAN#
n
Counts
.