IQHS1U Enclosure
SECTION 2
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
2.1
Technical Profile
Features
Inputs/Outputs
RollCall™ Remote Control..BNC connector
RS422/485 Remote Control9-pin D-type connector
Active Front Panel Controls
Dedicated Push Buttons for:Home; Previous; Return; Modules;
Lock; Setup; Save; Recall; Display
Select; Menu Text Select;
Spinwheel for menu control
Preset Controls
Unit address code set switches
2 Hex switches 0 to F
Communications mode switch
Select RollCall™ 485 or RS422
interface
Additional Controls via RollCall™ Remote Control
System
Full Control via active front panel
Specifications
Number of Modules that may be accommodated:
3 double width or 6 single width (or
combinations of both) fitted
horizontally
Module card dimensions.....100 mm wide, 340 mm long.
Module rear connector........64 way
Module rear panel dimensions
103.4 mm wide, 40.4 mm (double
width)
20 mm (single width) high.
CE Performance Information
Environment ......................Commercial and light industrial E2
Peak Mains Inrush Current following a 5 second mains
interruption
18.7 A peak at 0°
Power
Input Voltage Range .......... 100 - 240 V 50/60 Hz
Input Connector ................. IEC320 Fused 2 A(T)
Power Switch..................... Behind drop-down front panel
Input Current...................... 1.8 A maximum
Modules Power Dissipation 60 W maximum
Output................................ +7.5 V and -7.5 V ± 5%
Note that all modules have built-in power supply fuses.
Mechanical
Temperature Range........... 0 to 40° C operating, -30 to +75°
storage. Cooling fan is fitted.
Case Type ......................... 1U rack mounting steel case
Dimensions........................ 483 mm x 455 mm x 44.4 mm (w,
d, h)
Depth behind rack ears excluding space for leads
415 mm
Weight ............................... Approximately 5kg. without
modules