IQH1S 1U Enclosure
SECTION 0
IQH1SINS
23/11/06
www.snellwilcox
Version 1 Issue 4
0.5
Rack Mounting the Enclosure
When rack-mounting the product, one of the following methods of installation must be used: -
•
Place the unit on a suitably specified, and installed rack shelf and secure the product to the rack via the
front rack ears or,
•
Fit the unit using the rear rack mount kit available from Snell & Wilcox by quoting the order code FGACK
RACK-MNT-KIT.
This product must not be rack mounted using only the front rack ears.