IQH1S 1U Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.6
The
Display Select
buttons allow the Information
Window to display two different sets of information:
1
Identity
Codes
The
first line
will show the unit name
The
second line
will show the unit address code
and the RV (RollCall Version)
The
third line
will show the unit identity (RollCall)
for that unit as three sets of digits separated by a
dot.
1st set =
The version of the control unit
2nd set =
Variant of software version
3rd set =
Control
compatibility
version
number
The
fourth line
will display system save codes
2
Current selections and conditions
First Line
:
(Unit Name)
This line shows the name of the unit.. If the name
has been changed in the Unit Name Menu the new
name will appear here.
Second line:
Signal(s) input status
Third Line:
Status of other signal
Fourth Line:
This line may be blank or show one of the
following:
Presetting
Presetting indicates that the unit has been asked to
return all settings to their default values and the
unit is performing this operation.