IQH1S IU Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.9
SETUP MENU SYSTEM
SETUP
Pressing this button displays a list of front panel
options in the CONTROL window. Examples of
these are shown in the `Setup Menu System'
drawing on the previous page.
SETUP Sub-Menus
These are selected by pressing the button adjacent
to the desired function.
MAIN MENU
(Supervisor Level)
F/Panel Address
F/Panel Name
Auto Connect
Default Unit
Backlight
Network
Min Unit Addr
Max Unit Addr
Lock Controls
Access Level
Set Password
Software Version
Note that all these sub-menus include a SAVE
function that is used to save particular settings. If
the changed settings do not need to be saved use
the RETURN function to return to the previous
menu; this action will abandon any changes and
revert to the previously saved settings.
F/Panel Address
The address of this control panel will be displayed
as a 2-digit hexadecimal code.
Unit Address:
FF (Hex)
Save
F/Panel Address
Note that the code 0,0 effectively switches the unit
off from the network. The codes 0,1 to 0,F inclusive
are reserved for bridge addresses. Codes 1,0 to
F,F inclusive are available to the user.
The address code is user defined in the range 1,0
to F,F and is set by rotating the spinwheel to the
desired code and selecting the SAVE function.