IQH1S IU Enclosure
SECTION 4
IQH1SOPS
23/11/06
www.snellwilcox.com
Version 1 Issue 4
4.35
System/Setup
This function allows various system functions to be
set up.
Unit Name
Serial Number
Hardware Version
Software Version
Build Number
Loader Version
NetShow
Allow Blind Control
Where Am I?
Serial Speed
Serial Mode
Pass I_AM (Serial)
Pass TIME (Serial)
Restart Unit
Format Menu Cache
Enable Menu Cache
Start Time
Box Type
System/Setup
Unit Name
Unit Name
Unit Name
0
Clear
Preset
OK
This allows the unit to be given a meaningful name.
Serial Number
OK
Seial Number
Xxxxxxxx
Serial Number
This shows the serial number of the unit.
Hardware Version
OK
RCIF1U
Hardware Version
This shows the version number of the hardware
used in the Gateway.
Software version
Software Version
Software Version
OK
This shows the software version installed.
Build Number
Build Number
Build Number
0045601367
OK
This shows the software build number of the unit.
Loader Version
Loader Version
Loader Version
2.9 .6
OK
This shows the version of the gateway software
loader. [The loader operates at start up only,
validating all gateway files before the main
application runs]
Net Show
This function allows a unit to be `hidden' from the
network system. Pressing the adjacent button will
toggle the text from normal to reversed.
When the text shows as normal the previously
selected unit will not appear in the Module List
displayed on other control panels in the system.
When the text is reversed the unit will appear in the
Module List displayed on other control panels in the
system.
When netshow is active the unit broadcasts its
presence.
Note that if the unit address is changed Netshow
will automatically be turned On.
