TBS100/100D
SECTION 4
TBS100OPS
20/10/06
www.snellwilcox.com
Version 2 Issue 5
4.2
CONTROL PANEL - GENERAL INFORMATION
Pressing the
Home
button will display the home
status screen in the display window from any
position in the menu hierarchy.
The
Previous
button allows a return to the last
menu item that was changed. Up to 20 changed
menu items may be retraced using this function.
The
Return
button will allow access to the
previously selected menu or back to the home
screen as appropriate.
When the
Scroll
LED is illuminated this indicates
that a menu contains more than four text lines and
the spinwheel may be used to scroll through the
menu.
When the
Adjust
LED is illuminated this indicates
that parameter values and alpha-numerics may be
changed.
If a menu title is followed by three dots
e.g.
Input Standards...
this indicates that a further sub-menu is available
for selection.
Display Window
The display window displays all Selection Menus
sub-menus and unit status information.
The selection is made by pressing the button
adjacent to the required item and will become
highlighted (reversed text) when active.
The example opposite shows the Auto Gain Control
function selected.
An example of the display showing the unit status is
shown opposite.
Note that the display window will automatically
revert to the home page (as would be seen if the
Home button was pressed) if a front panel control
has not been operated for a period of 1 minute.
For details of other abbreviations used in this
display please see pages 4.39 and 4.40.
Auto Gain Control
Auto Chroma Control
PAL Chroma Averager
PAL Line 23
01:TBS100D
In:CVBS A
Ref : OK
Enhance: off
YNr: off
Timing: off
CNr: Low
