TBS100/100D
SECTION 4
TBS100OPS
20/10/06
www.snellwilcox.com
Version 2 Issue 5
4.19
RollCall PC Control Panel Screens for the TBS100/TBS100D/TBS100TX/TBS100DTX
Control
Input Select
This allows any one of the three sources of video
input signal to be selected for processing.
Pattern
This function will allow various patterns to be used
as the output signal when the pattern Enable
function is selected.
Feature Select
Freeze
The output will become a frozen picture of the last
frame.
Pattern Enable
The output will become the pattern selected above.
Noise Reduce Enable
This will enable the noise reduction.
The level of noise reduction is set via the Setup
screen.
Enhance Enable
This will enable the enhancement function.
The level of enhancement is set via the Setup
screen.
Genlock Enable
This will enable the genlock function.
Split Screen
To enable the effects of noise reduction to be
easily seen this function allows the screen to be
split into 2 halves either left/right or top/bottom.
One half will show the picture with noise reduction
and the other half without noise reduction.
Off
This will disable the split screen function.
Top Bottom
When enabled the screen will be split into two
equal sections separated by a horizontal white line.
The processed picture will occupy the top section
of the screen and the unprocessed picture will
occupy the bottom section.
Left Right
When enabled the screen will be split into two
equal sections separated by a vertical white line.
The processed picture will occupy the left hand
section of the screen and the unprocessed picture
will occupy the right hand side section.
Note that this feature will only show the effects of
noise reduction and not enhancement.
