TBS100/100D
SECTION 4
TBS100OPS
20/10/06
www.snellwilcox.com
Version 2 Issue 5
4.24
Noise Reduction
This screen allows noise reduction to be applied to
the signal.
Noise Reduction Enable
Selecting this item will enable the noise reduction
functions.
Y Noise Reduce
This item allows Recursive noise reduction to be
applied to the luminance channel.
The range of level adjustment is Off, Low, Medium
and High. Preset is to Low.
C Noise Reduce
This item allows Recursive noise reduction to be
applied to the Chrominance channel.
The range of level adjustment is Off, Low, Medium
and High. Preset is to Low.
Split Screen
To enable the effects of noise reduction to be
easily seen this function allows the screen to be
split into 2 halves either left/right or top/bottom.
One half will show the picture with noise reduction
and the other half without noise reduction.
Off
This will disable the split screen function.
Top Bottom
When enabled the screen will be split into two
equal sections separated by a horizontal white line.
The processed picture will occupy the top section
of the screen and the unprocessed picture will
occupy the bottom section.
Left Right
When enabled the screen will be split into two
equal sections separated by a vertical white line.
The processed picture will occupy the left hand
section of the screen and the unprocessed picture
will occupy the right hand side section.
