TBS100/100D
SECTION 4
TBS100OPS
20/10/06
www.snellwilcox.com
Version 2 Issue 5
4.27
Genlock (continued)
Genlock Offset Phase SECAM
This item allows adjustment of the horizontal timing
of the output signal relative to the reference sync
signal, in nanoseconds.
The range is approximately ±37
µs in steps of
74 ns.
Selecting Preset returns the setting to zero.
(Output coincident with reference)
Genlock Offset Phase NTSC
This item allows adjustment of the horizontal timing
of the output signal relative to the reference sync
signal, in nanoseconds.
The range is approximately ±113
µs in steps of
one cycle of subcarrier (279 ns). (This ensures the
correct SC/H timing is maintained)
Selecting Preset returns the setting to zero.
(Output coincident with reference)
Genlock Offset Phase PALM
This item allows adjustment of the horizontal timing
of the output signal relative to the reference sync
signal, in nanoseconds.
The range is approximately ±113
µs in steps of
one cycle of subcarrier (279 ns). (This ensures the
correct SC/H timing is maintained)
Selecting Preset returns the setting to zero.
(Output coincident with reference)
Genlock SC Phase
(Deg Scroll Bars)
This function allows the relative phasing between
the reference subcarrier and the output signal
subcarrier to be adjusted.
The range of adjustment is 359.9° (continuously
adjustable) in steps of 0.1° and the preset value is
0° (Output coincident with reference)
Note that the Preset Unit function in the Memories
and Logging and Preset screen will not change this
setting.
