TBS100/100D
SECTION 4
TBS100OPS
20/10/06
www.snellwilcox.com
Version 2 Issue 5
4.31
GPI Output Setup
This function allows the GPI connection to be
configured as an output and its action defined.
Output Enable
When selected the GPI connection will be
configured as an Output.
Note that this function will toggle with the Input
Enable function.
Output Mode
When the GPI connection is configured as an
Output this item allows the type of output signal to
be selected.
Delay Flag
When enabled the output will go high representing
the input/output time delay through the unit.
High on Input Loss
When selected the GPI output will go high if the
input signal is lost
Low on Input Loss
When selected the GPI output will go low if the
input signal is lost.
Input Line Std 625/525
The GPI output will become high to indicate the
selected input line standard.
