www.snellgroup.com
Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion
Version 1 Issue 1
©
Snell 2009
Page 42
4. In the Internet Protocol (TCP/IP) Properties window, select
Use the following IP address
and enter
an
IP address
of 192.168.0.1 and a
Subnet mask
of 255.255.255.0 then click
OK
.
5. Connect to the unit by entering the address 192.168.0.100 (or enter http://192.168.0.100) into your
web browser.
To connect through a DHCP network:
1. Ascertain from the Network Administrator the allocated IP address that corresponds to the unit's MAC
address (as written on the unit itself).
2. Connect the unit to a network hub or switch using a standard (i.e. not 'cross-wired') ethernet (RJ45)
cable.
3. Connect to the unit by entering the given address into your web browser, preceded by “http://” if
necessary.
