www.snellgroup.com
Mach HD V2 Motion Compensated Standards Converter with Synchronizer, Up, Down, and Cross Conversion
Version 1 Issue 1
©
Snell 2009
Page 55
Audio
ADC A Headroom
Use the slider bar to adjust the ADC A headroom
b12 dBu and +24dBu in 0.5dB steps
Click reset to return the control to its default value
of 18dBu.
Note that if the applied audio level exceeds the
value set for the Headroom the processed audio
will be clipped.
ADC B Headroom
Use the slider bar to adjust the ADC B headroom
b12 dBu and +24dBu in 0.5dB steps
Click reset to return the control to its default value
of 18dBu.
DAC 1 level
Use the slider bar to adjust the DAC 1 audio
output level for 0dBFS b12 dBu and
+24dBu in 0.5dB steps
DAC 1 outputs audio selected under the Audio A
tab..
DAC 2 level
Use the slider bar to adjust the DAC 2 audio
output level for 0dBFS b12 dBu and
+24dBu in 0.5dB steps
DAC 2 outputs audio selected under the Audio B
tab..
Embed grp AB
Select the embed group for audio selected under
the Audio A and Audio B tabs. Audio A will be
embedded into pair 1 of the selected group and
Audio B will be embedded to pair 2.
Embed grp CD
Select the embed group for audio selected under
the Audio A and Audio B tabs. Audio A will be
embedded into pair 1 of the selected group and
Audio B will be embedded to pair 2. Note that if the
same group is selected for AB and CD only audio
AB will be embedded.
Tone Frequency
Use the slider to adjust the tone frequency
between 100Hz and 10kHz in 100Hz steps.
AES Source
Use this control to specify the AES source – either
Balanced or Unbalanced.
