8
High Level Connection
The method for making high level connections is to connect both the ICS Sub 24 mk3 and the main speakers directly
to the amplifier. Consequently the main speakers will operate full range. High pass filtering is available only via the
low level inputs or through your processor
There are two connection methods. Both methods are electrically equivalent. Which one you use will depend largely
on you physical set up of your room.
One method is to connect both the main
speakers and the ICS Sub 24 mk3 directly to
the amplifier.
������������������
�
�
�
�
����������������������
����������������
������������������
�
�
�
�
����������������������
����������������
The other method is to connect the amplifier to the
main speakers and then run extension wires from
the main speakers to the ICS Sub 24 mk3.
