Amplifier Panel
Main
Speakers
Receiver
+
L
R
-
HIGH LEVEL IN FROM AMP
L
+
–
R
+
–
HIGH LEVEL OUT TO MAIN SPEAKERS
WIRING FOR 2-CHANNEL AUDIO
Using speaker-level wiring
Option 1
Connect from the main speaker out on the receiver
to the
sub.
Connect the main speakers to the
output of the subwoofer.
NOTE: The main speakers will be high pass filtered
in this configuration.
Speaker-Level Wiring
The simplest way to wire the subwoofer is via the
speaker connections. This does not present any
additional load to your amplifier. The
Sub300
is
not sensitive to wire length, therefore you may
want to use long wires at first to allow for experi-
mentation with placement. There are three options
for wiring using speaker-level inputs. Which option
you select will probably be influenced by the place-
ment of the speakers in relation to each other and
the electronics. The resulting sound will be the
same.
NOTE: Be sure to maintain a consistency of
+
to
+
(positive) to (positive) and
-
to
-
(negative) to
(negative).
The 5-way binding posts permit easy connection to
banana plugs, spade lugs, and bare wire.
